Double Cone Rotary Vacuum Dryer for Material with Heat Sensitivity

Model NO.: SZG Operational Method: Intermittent Drying Medium: Hot Water, Low Pressure Steam, Thermal Oil Heating Mode: Transmission Type of Flow: Contra-Flow Sprayer: None Function: Mixing Specification: Customized HS Code: 8419399090 Structure: Rotary Type Drier Operation Pressure: Vacuum Dryer Appearance of Dried Sample: Powder, Bulk, Granule Movement Way: Fixed Type of Atomization: None Warrenty: One Year Trademark: ZHENGAN Origin: Jiangsu, China SZG Series Double Cone Rotary Vacuum Dryer   DESCRIPTION SZG Series Double cone Rotating Vacuum Dryer is a new generation drying device developed by our factory on the basis of combining the technology of similar equipment. It has two connecting ways, belt connection and chain connection. Therefore, the dryer is stable in operation. The special design guarantees two shafts realize good concentricity. The heat medium and vacuum system all adapt reliable rotating connector with the technology from USA. On this basis, we also developed SZG-A. It can carry out steeples speed change and constant temperature control. As a specialized factory in drying industry, we supply hundred sets to the customers every year. As for working medium, it may be thermal oil or steam or hot water. For drying the adhesive raw material, we have designed specially a stirring plate buffer for you.
WORKING PRINCIPLE 1. When the heat source (hot water, low pressure steam, or thermal oil) pass through the sealed jacket, the heat will be transmitted to raw material through the inner shell; 2. Under action of driving power, the tank is rotated slowly and the raw material is mixed continuously. The purpose of reinforced drying can be realized  3. The raw material is under vacuum condition. When steam pressure is dropping, it makes the moisture (solvent) at the surface of raw material become saturation and then evaporates. The solvent will be discharged through Vacuum pump. 4. The moisture (solvent) of raw material will infiltrate, evaporate and discharge continuously. 5. The production processes are carried out continuously and the drying can be done in a short time. 
  APPLICATION
This dryer is suitable for the raw materials that need to concentrate, mixed and dried at low temperature (for example, biochemistry) products in chemical, pharmaceutical and foodstuff industries. Particularly it is suitable for the raw materials that are easy to be oxidized, volatilized and have heat sensitivity and is toxic and not permitted to destroy its crystal in drying process   Recommended Production Process: Solvent Recovery Process Resettlement   Hot Water  Piping Pumps  Dryer  Filter Vent Valve Buffer Tank  Condenser Vacuum Pump     FEATURES Use automatic constant temperature control if the heat source is thermal oil. It can be used for drying biology products and mineral raw materials. The temperature of operation can be adjusted form 20 ~ 160oC. The heat efficiency will be 2 times or higher comparing to the common dryer. The heating method is indirect drying so the raw material will not be polluted. It is in conformity with the requirement of GMP.  The dryer is easy for cleaning and maintenance.   SCHEMATIC STRUCTURE  Rotary Joint Sealing Seat  Heat Source Inlet Condenser or Reflux TECHNICALPARAMETERS

Model	100	350	500	750	1000	1500	2000	3500	4500	5000
Item
Inside Volume of Tank(L)	100	350	500	750	1000	1500	2000	3500	4500	5000
Practical Loading Volume (L)	≤50	≤175	≤250	≤375	≤ 500	≤750	≤1000	≤1750	≤2250	≤2500
Rotary Speed(r.p.m.)	3~13					6	5	4	4	4
Power of Motor(kw)	0.75	1.1	1.5	2.2	3	4	5.5	7.5	11	15
Occupied Area LxW(mm)	2160 x800	2260 x800	2350 x800	2560 x1000	2860 x1300	3060 x1300	3260 x1400	3760 x1800	3960 x2000	4400 x2500
Rotating Height (mm)	1750	2100	2250	2490	2800	2940	2990	3490	4100	4200
Design Pressure for Inside of Tank (MPa)	-0.1~0.15
Design pressure of jacket (MPa)	≤0.3
Working Temperature(°C)	(inside of the tank≤85)    (jacket≤140)
Model and Power of Vacuum Pump	SK-0.4	SK-0.4	SK-0.8	SK-1.5	SK-1.5	SK-3	SK-6	SK-6	SK-9	SK-12
	1.5KW	1.5KW	2.2KW	4KW	4KW	5.5KW	11KW	11KW	15KW	18.5KW
weight (kg)	800	1100	1200	1500	2800	3300	3600	6400	7500	8600

If you are interested to learn more about our products, please feel free to contact us

Contact Information
Company Name	Jiangsu Zhenxing Drying Equipment Co.,Ltd.
Contact Person	Carol Ding
Email
	0086-159-6129-8220
TEL	0086-519-85257376
FAX	0086-519-88670178
Website	www.drying-equipment.CN

Contact us if you need more details on Industrial Dryer. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Vacuum Dryer、Drying Machinery. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Vacuum Dryer > Double Cone Rotary Vacuum Dryer