High accuracy and easy operation laboratory high pressure chemical reactor autoclave

 High accuracy and easy operation laboratory high pressure chemical reactor autoclave  

Model	weight: normal; font-size: 12px;">FCFSK-0.25L	FCFSK-0.5L	FCFSK-1L	FCFSK-2L	FCFSK-3L	FCFSK-5L
Kettle volume	250ml	500ml	1000ml	2000ml	3000ml	5000ml
Design pressure	not more than 22mpa
Set tempreture	not more than 300℃
Heating method	Conventional electric heating, far infrared, heat transfer oil, steam, circulating water, etc.
Heating power	0.8KW	1.5KW	1.5KW	2KW	2.5KW	4KW
Stirring speed	Startup ~ 500 rpm (stepless speed regulation)
Lifting method	FCFSK type is manual lifting kettle lid quick opening type
Discharge method	It is usually discharged from the discharge tube on the lid of the kettle, or bottom discharge according to customer needs
Temperature controller	Using PID smart meter, real-time display speed, temperature, working time, heating voltage, etc., to adjust the heating voltage. Temperature and speed, standard PID automatic temperature adjustment table, can be automatically constant temperature, can be equipped with motor ammeter, pressure digital display meter and microcomputer software.
Temperature controller working environment	Ambient temperature: 0 ~ 50 ℃, relative humidity: 30 ~ 85%, no conductive dust, no Egyptian corrosive gas in the surrounding medium
Remark	Can be customized according to customer requirements

  Attention: 1. The autoclave is a precision device. The sealing ring adopts a conical surface contact seal. By tightening the main bolts, they are pressed against each other to achieve the purpose of sealing. Special care must be taken to seal the cone surface to avoid various collisions and damage to it. When installing the lid, first place the reactor kettle body, and then place the kettle lid in the fixed position and carefully install it on the kettle body. When tightening the main bolt, you must tighten it diagonally and symmetrically for several times. Uniform, the asphalt kettle lid is tilted to one side to achieve a good sealing effect, and the tightening torque must not exceed the specified torque to prevent the sealing surface from being crushed or accelerated. 2. After the completion of each operation, the residue on the kettle body and the lid of the kettle should be removed. All sealing surfaces on the autoclave should be cleaned frequently and kept dry. It can be cleaned with hard objects or soft objects with rough surfaces. 3. The reactor should be operated in strict accordance with the "Safety Use Regulations of High Temperature and High Pressure Reactors", and should not be operated separately. Two or more persons are required for the experiment. 4. During the autoclave operation, turn on the ventilation fan to ensure good ventilation. 5. When there is pressure in the kettle, it is strictly forbidden to twist the nut or knock on the autoclave. 6. At the connection of the positive and negative nuts (inlet pipe, exhaust pipe, and branch pipe connecting the pressure gauge and the kettle cover), only rotate the nut, and do not allow the two sealing surfaces to rotate relatively. 7. Observe the indication of the pressure gauge at any time during operation. It is strictly forbidden to use the kettle under the conditions of overtemperature and overpressure. 8. If there is air leakage during the experiment, stop heating immediately and stop the experiment. It is strictly forbidden to twist the nut at high temperature.   Over the past 20 years, we have gained the trust and support of many customers. Our company has established close cooperative relations with many world famous brands, providing high-quality products and pre-sales and after-sales services for the scientific research and development of all walks of life. In order to respond to the national "ribbon" strategy, we set up an overseas international business department to become a cross-border e-commerce to expand overseas markets and bring high-quality products to overseas customers.   1.Do you provide free samples? A:Yes. We offer free samples, including customized samples. You only need to pay the freight. Sample delivery date is within 1- 3days, customized sample is about 3-7days. 2.Can you provide us a competitive price and good quality products? A:Yes. We have our strict evaluation criteria of quality on our partner factory, and we did complete and detailed market research and priced competitively. 3.What is your terms of payment? A:We accept T/T, Visa, MasterCard, E-checking, L/C, Western Union and more.Please choose your preferred payment method. 4.How to inspect the goods? A:Products will be checked by our QC staff first , then our project manager. Client can come and check by themselves or third-party check is available.

Contact us if you need more details on reactor high pressure. We are ready to answer your questions on packaging, logistics, certification or any other aspects about high pressure reactor autoclave、laboratory high pressure chemical reactor. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Lab equipment > high pressure reactor