Find High Pressure Reactor, High Quality High Pressure Reactor, High Pressure Reactor Details on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)
Home > Products > Lab equipment > high pressure reactor > Manual lifting leak-free reaction equipment laboratory high pressure chemical reactor

Manual lifting leak-free reaction equipment laboratory high pressure chemical reactor

Product Description

Manual lifting leak-free reaction equipment laboratory high pressure chemical reactor  


weight: normal; font-size: 12px;">FCFSK-0.25L






Kettle volume







Design pressure

not more than 22mpa

Set tempreture

not more than 300℃

Heating method

Conventional electric heating, far infrared, heat transfer oil, steam, circulating water, etc.

Heating power







Stirring speed

Startup ~ 500 rpm (stepless speed regulation)

Lifting method

FCFSK type is manual lifting kettle lid quick opening type

Discharge method

It is usually discharged from the discharge tube on the lid of the kettle, or bottom discharge according to customer needs

Temperature controller

Using PID smart meter, real-time display speed, temperature, working time, heating voltage, etc., to adjust the heating voltage. Temperature and speed, standard PID automatic temperature adjustment table, can be automatically constant temperature, can be equipped with motor ammeter, pressure digital display meter and microcomputer software.

Temperature controller working environment

Ambient temperature: 0 ~ 50 ℃, relative humidity: 30 ~ 85%, no conductive dust, no Egyptian corrosive gas in the surrounding medium


Can be customized according to customer requirements

  Attention: 1. The autoclave is a precision device. The sealing ring adopts a conical surface contact seal. By tightening the main bolts, they are pressed against each other to achieve the purpose of sealing. Special care must be taken to seal the cone surface to avoid various collisions and damage to it. When installing the lid, first place the reactor kettle body, and then place the kettle lid in the fixed position and carefully install it on the kettle body. When tightening the main bolt, you must tighten it diagonally and symmetrically for several times. Uniform, the asphalt kettle lid is tilted to one side to achieve a good sealing effect, and the tightening torque must not exceed the specified torque to prevent the sealing surface from being crushed or accelerated. 2. After the completion of each operation, the residue on the kettle body and the lid of the kettle should be removed. All sealing surfaces on the autoclave should be cleaned frequently and kept dry. It can be cleaned with hard objects or soft objects with rough surfaces. 3. The reactor should be operated in strict accordance with the "Safety Use Regulations of High Temperature and High Pressure Reactors", and should not be operated separately. Two or more persons are required for the experiment. 4. During the autoclave operation, turn on the ventilation fan to ensure good ventilation. 5. When there is pressure in the kettle, it is strictly forbidden to twist the nut or knock on the autoclave. 6. At the connection of the positive and negative nuts (inlet pipe, exhaust pipe, and branch pipe connecting the pressure gauge and the kettle cover), only rotate the nut, and do not allow the two sealing surfaces to rotate relatively. 7. Observe the indication of the pressure gauge at any time during operation. It is strictly forbidden to use the kettle under the conditions of overtemperature and overpressure. 8. If there is air leakage during the experiment, stop heating immediately and stop the experiment. It is strictly forbidden to twist the nut at high temperature.   Over the past 20 years, we have gained the trust and support of many customers. Our company has established close cooperative relations with many world famous brands, providing high-quality products and pre-sales and after-sales services for the scientific research and development of all walks of life. In order to respond to the national "ribbon" strategy, we set up an overseas international business department to become a cross-border e-commerce to expand overseas markets and bring high-quality products to overseas customers.   1.Do you provide free samples? A:Yes. We offer free samples, including customized samples. You only need to pay the freight. Sample delivery date is within 1- 3days, customized sample is about 3-7days. 2.Can you provide us a competitive price and good quality products? A:Yes. We have our strict evaluation criteria of quality on our partner factory, and we did complete and detailed market research and priced competitively. 3.What is your terms of payment? A:We accept T/T, Visa, MasterCard, E-checking, L/C, Western Union and more.Please choose your preferred payment method. 4.How to inspect the goods? A:Products will be checked by our QC staff first , then our project manager. Client can come and check by themselves or third-party check is available.

Contact us if you need more details on reactor high pressure. We are ready to answer your questions on packaging, logistics, certification or any other aspects about high pressure reactor、laboratory high pressure chemical reactor. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Lab equipment > high pressure reactor