Hotsale Hg Series Cylinder Scratch Board Dryer Drying

Model NO.: HG Series


Operational Method: Continuous


Drying Medium: Effluent Gases


Heating Mode: Transmission


Type of Flow: Parallel Flow


Sprayer: None


Voltage: 220V/380V


Color: 15kw


Transport Package: Wooden Case


Origin: Mainland




Structure: Cylinder Scratch Board Dryer


Operation Pressure: Atmospheric Dryer


Appearance of Dried Sample: Bulk


Movement Way: Combined


Type of Atomization: None


Certification: ISO9001


Warranty: One Year


Trademark: ZHENGAN


Specification: other


HS Code: 8419399090


hotsale HG Series Cylinder Scratch Board Dryer drying





WORKING PRINCIPLE

HG Series Cylinder Scratch Board Dryer is a kind of rotating continuous drying equipment with internal heating conducting function. The material film will stick to the bottom of the rotating cylinder. The heat is transferred to the internal wall of the cylinder through piping system and it will be conducted to the external wall and material film. The moisture of the wet material film will be easily evaporated and the dried material will be scraped from the cylinder surface and transfer to the packing area by the screw conveyor.



APPLICATION

This dryer is suitable for drying liquid raw material or sticky material in chemical industry, dyestuff industry, pharmaceutical industry, foodstuff industry, and metallurgy industry, and etc.

FEATURES

1.High heat efficiency: The heat transfer of the cylinder dryer is heat conduction and the conducting direction keeps identical with operation circle. Most of the heats can be used for evaporation of wet materials on the wall the cylinder. The efficiency can reach 70-80%.

2.Flexible operation elasticity and wide application: Various drying factors of the dryer can be adjusted, such as concentration of the liquid, thickness of material film, temperature of heating medium, rotating speed of the drum, and etc. These factors can change drying efficiency of the cylinder dryer. As these factors have no interrelations each other, it brings great convenience to dry operation and makes it applicable to dry different materials and meet different production requirements.

3. Short drying period: The drying period of materials is normally 10 to 300 seconds, so it is suitable for heat-sensitive materials. It also can be pressure reducing operated if it is put in vacuum vessel.

4.Fast drying rate: The thickness of the material film on the wall of the cylinder is very thin. Normal, thickness is 0.3 to 1.5mm. The directions of heat and mass transmittal are identical so the evaporation strength on the surface of material film can be 20-70 kg.H2O/m2.h.

TECHNICALPARAMETERS

Item Model	Cylinder Size D*L(mm)	Effective Heating Area(m²)	Drying Capacity (kg.H2O/m2.h)	Steam Consumption (kg/h)	Power (kw)	Dimension (mm)	weight (kg)
HG-600	Φ600×800	1.12	40-70	100-175	2.2	1700×800×1500	850
HG-700	Φ700×1000	1.65	60-90	150-225	3	2100×1000×1800	1210
HG-800	Φ800×1200	2.26	90-130	225-325	4	2500×1100×1980	1700
HG-1000	Φ1000×1400	3.30	130-190	325-475	5.5	2700×1300×2250	2100
HG-1200	Φ1200×1500	4.24	160-250	400-625	7.5	2800×1500×2450	2650
HG-1400	Φ1400×1600	5.28	210-310	525-775	11	3150×1700×2800	3220
HG-1600	Φ1600×1800	6.79	270-400	675-1000	11	3350×1900×3150	4350
HG-1800	Φ1800×2000	8.48	330-500	825-1250	15	3600×2050×3500	5100
HG-1800A	Φ1800×2500	10.60	420-630	1050-1575	18.5	4100×2050×3500	6150

Notes:

We can design double cylinder dryer with feeder on the top based on customer's requirements.



Installation:

This dryer has to be installed in accordance with the general layout. The ground should be smooth, and the steam inlet should be installed with pressure gauge and safety valve. Make sure all flanges are securely connected.

Commissioning:

- Observe and make sure the main cylinder is rotating correctly.

- Observe and make sure the rotation of the cylinder and various transmission components is flexible.

- Observe and make sure the steam inlet and outlet are connected and the pressure gauge is within the operating range.

- The operation of the main cylinder shall be stable after motor started. The material shall be fed into the dryer after temperature rises and then adjust the motor speed in order to control the uniformity of the film and the final moisture content of the material.

- The finished product shall be discharged when starting the auger motor. The auger motor speed shall be adjusted according to the conveying capacity of the finished product

Maintenance:

- Schedule regularly checks for the rotation flexibility of rotating parts and check if there is any jamming.

- The sprockets and other components shall be regularly greased.

- Schedule periodic calibration for pressure gauges and other measuring devices.

- The V-belt transmission is a wear part and it should be replaced regularly.

- The maintenance of motor and reducer should refer to its own manual.

If you are interested to learn more about our products, please feel free to contact us:

Conact information
Company Name	jiangsu zhenxing drying equipment co.ltd
Contact Person	Beryl Wang
Email
	0086-150-6113-0370
TEL	0086-519-85257376
FAX	0086-519-88670178
Website	www.drying-equipment.CN

Contact us if you need more details on Drying. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Drying Machine、Drying Equipment. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : HG Series Cylinder Scratch Board Dryer